K ++ V2 main control installation K++V2 Flight Controller User Manual

1. K ++ V2 FC diagram

2. K ++ V2 installation location requirements

1). It needs to face up, not upside down, and try to keep it parallel to the fuselage;

2). In order to obtain the best flight effect, it is recommended to install the flight control level at the center of gravity of the aircraft. If the flight control installation position is not at the center of gravity of the aircraft, please fill in the corresponding installation distance in the Basic-> Installation-> Installation Position interface in the K ++ Assistant Software;

3). The flight controller has done a good job of internal shock absorption, and try to use hard 3M glue to fix the flight controller.

3. K ++ V2installation orientation requirements

As shown in the figure, select one of the installation directions, and select the corresponding configuration in the Basic-> Installation-> IMU Direction interface in the K++ V2 Assistant Software. (The direction of the red arrow represents the head direction)