The motor does not turn after the remote control is unlocked. What is the reason?
Answer:
1. The value of the normal remote control calibration should be the minimum value of 1000, the intermediate value of 1500, and the maximum value of 2000, and the deviation value cannot be greater than 100.
2. Check whether the direction of the CH1-CH4 channel of the remote control is correct, especially the second channel (pitch channel). When the remote control lever of the second channel is pushed up, the slider displayed on the assistant software should be moved to Far left.
3. The flight mode switch should be placed in ATT mode.
4. Connect to mobile phone app, listen to the voice broadcast after unlocking. The magnetic compass is disturbed, the alarm voltage is not set, and the magnetic compass is not calibrated.
5. Check whether the idle speed set by the motor is appropriate. Generally, the slow speed is set. When the setting is low, the unlocking is normal and the motor will not rotate.
It can only be set in the computer assistant interface, as shown below:
