Installation Notes

1. Adapted products and software versions:

K ++ firmware version after 190617 (including 190617)

Flight Defense Manager version number: V1.3.8 and later versions (including V1.3.8)

K ++ Assistant Software Version: V1.0.4 and later versions (including V1.0.4)

2.Wiring instructions

The radar should be installed without obstruction within 60 degrees below (as shown in the figure), as far as possible from water mist.

3.Instruction of installation position

Connect the CAN port connector of the ground-like radar to the 12V · CAN interface of the CAN HUB-12 module.