Installation Notes

1. Adapted products and software versions:

K ++ firmware version after 190617 (including 190617)

Flight Defense Manager version number: V1.3.8 and later versions (including V1.3.8)

K ++ Assistant Software Version: V1.0.4 and later versions (including V1.0.4)

2.Wiring instructions

Connect the CAN port connector of the obstacle avoidance radar to the 12V · CAN interface of the CAN HUB-12 module.

3.Instruction of installation position

The radar is installed in front of the nose and tilts upwards by 15 degrees. It should be noted that there is no obstruction in the range of 15 degrees in front (as shown in the figure), and it should be far away from water mist.